Today’s project is definitely a wow as I created an alternative card using parts of the July 2024 Paper Pumpkin kit called “Painted Petals”. One of the things I always enjoy doing is taking patterned cards or paper and finding a way to alter them. This card is all about the floral layer that really is gorgeous as it is. However by masking off the petals and stalks I was able to add copper heat embossing to the frame section. Although it’s not perfect, I love the way it turned out.

WOW EMBOSSING POWDER
I began by choosing the die-cut daisy panel from the Paper Pumpkin kit. Then I found an old roll of cheap washi tape and used it to cover up the petals and leaves printed across the ‘frame’. This took about 10 minutes but I knew that the time taken at this stage would be worth the effort.

Once I’d finished masking off the areas I didn’t want embossed I carefully pressed a VersaMark Ink Pad over the frame areas. Then I carefully removed the washi tape (which now of course also had VersaMark ink on it). Next I chose Metallic Copper from the Wow! Metallics Embossing Powders pack and sprinkled the powder over the remaining sticky ink on the panel. With that done I tapped off the excess powder and removed some stray specks before melting the rest using my heat tool set on 2 (high).
ALTERED CARD BASE
With the hard work done I was ready to create the base for my card. First I cut a 5-1/2″ x 8-1/2″ piece of Old Olive Card. Then with the long side at the top I scored the card at 4-1/4″. After folding it along the scored line I sharpened the crease with my Bone Folder to create a simple A2 card base.
Next I went back to the Paper Pumkin kit for the daisy card base. However all I wanted was the back so I began by cutting the green back from the floral front (I’ll use the front on another project). Then I trimmed 1/2″ off the right-hand side of the green piece and set that aside. From what was left of the back section I trimmed that down to 3-5/8″ x 4-7/8″. Then using Multipurpose Liquid Glue (Tombow) I attached my heat embossed floral panel on top. Finally after putting Mini Stampin’ Dimensionals on the back of the layered piece I mounted it onto the front of my A2 card base.

For the sentiment I chose “I’m so lucky to have you in my life” from the stamp set included in the Paper Pumpkin kit. I used the Gray Granite ink spot (also provided) to stamp the sentiment onto the shaped sentiment strip. Then I fixed that on top of the floral panel with more Mini Stampin’ Dimensionals.
To finish off the card I cut a 4″ x 5-1/4″ piece of Basic White Card and trimmed the 1/2″ strip taken from the green layer earlier down to 5-1/4″. Using liquid glue I attached the strip down the right-hand edge of the white card and then fixed that inside my card base. Finallly with the addition of the daisy printed envelope from the kit my project was complete. I hope you like it as much as I do.
Well that’s all from me for today, but for more inspiration from the Painted Petals Paper Pumpkin Kit do visit these other blogs:
PRODUCT LIST
Here’s a list of all the Stampin’ Up! products I used in addition to the Painted Petals Paper Pumpkin kit.










love it!
Thank you Donna
Very nice Tracy! I may try it!
Thank you Cindy. It’s definitely worth the effort.